Intellinet-network 525268 User Manual Uživatelský manuál

WIRELESS DUAL-BANDROUTER USER MANUAL MODEL 524988 (450N Gb) MODEL 525268 (300N) INT-524988/525268-UM-0312-03525268

10SYSTEM & NETWORK SETUP2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically,” then click “OK.”2.2.3 Rou

11SYSTEM & NETWORK SETUP2. With the Run window displayed, enter “cmd” in the “Open:” text eld, then click “OK.”

12SYSTEM & NETWORK SETUP3. Enter “ipcong,” then press <Enter>. The IP address displays, followed by the default gateway. In the example b

13SYSTEM & NETWORK SETUP2.3 Quick Setup The Quick Setup procedure lets you congure all the settings required for quick Internet access..The init

14SYSTEM & NETWORK SETUPDaylight Saving — If your locale uses Daylight Saving, activate “Enable Function” and select the duration using the dro

15SYSTEM & NETWORK SETUPMAC address — Enter the MAC address of your computer here if your service provider only permits a computer with a certai

16SYSTEM & NETWORK SETUP2.3.3 Setup Procedure for PPPoE xDSLUser Name — Enter the username assigned by your ISP. Password — Enter the password as

17SYSTEM & NETWORK SETUPcorrectly entered; otherwise, the Internet connection will fail even if the PPTP settings are correct. Contact your ISP if

18SYSTEM & NETWORK SETUP2.3.5 Setup Procedure for L2TP xDSLL2TP is another popular connection method for xDSL and other Internet connection types

19SYSTEM & NETWORK SETUP2.4 General Setup This section explains how to change the time zone, password and remoteNOTE TO DSL USERSWhile PPPoE is t

2 Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Wireless 300N Dual-Band Router, Model 525268, or the Wireless 450N Dual-Band Gigabit Rout

20SYSTEM & NETWORK SETUPmanagement settings. Start your Web browser and log on to the router’s Web management interface by opening http://192.168.

21SYSTEM & NETWORK SETUPIf the passwords entered in the “New Password” and “Conrmed Password” elds aren’t the same, you’ll see the message at

22SYSTEM & NETWORK SETUP2.5 Setting Up an Internet Connection (WAN Setup) The Internet connection setup can be done by using the Quick Setup menu

23SYSTEM & NETWORK SETUP2.5.1 Setup Procedure for Dynamic IPHost Name — Enter the host name of your computer. (This is optional and is only req

24SYSTEM & NETWORK SETUP2.5.3 Setup Procedure for PPPoEUser Name — Enter the username assigned by your Internet service provider. Password — Ente

25SYSTEM & NETWORK SETUPentered; otherwise, the Internet connection will fail even if the PPTP settings are correct. Contact your ISP if you don’t

26SYSTEM & NETWORK SETUP2.5.6 Setup Procedure for Telstra BigPondThis procedure is only for the Telstra BigPond network service in Australia. Use

27SYSTEM & NETWORK SETUPpreferred DNS server or use a static IP address, or if your service provider didn’t assign the IP address of the DNS serve

28SYSTEM & NETWORK SETUP2.5.9 Setup Procedure for WISP (Wireless ISP) Wireless Internet service providers (WISPs) are Internet service providers

29SYSTEM & NETWORK SETUPWireless Band — Check whether the WISP signal is found in either the 2.4 GHz or 5 GHz frequency range. Site Survey — Cli

3TABLE OF CONTENTSTABLE OF CONTENTS section page section page1 HARDWARE ... 5 1.1 Front Panel

30SYSTEM & NETWORK SETUP2.6.1 LAN IPIP address — Enter the IP address of this router. Subnet Mask — Enter the subnet mask for this network. 802.1

31SYSTEM & NETWORK SETUP“Start IP” and can’t be the same as the router’s IP address. Also, the rst three elds of the IP address of “Start IP,” “

32SYSTEM & NETWORK SETUP2.7 Wireless LAN Conguration If your computer, PDA, game console or other network device is equipped with a wireless net

33SYSTEM & NETWORK SETUP use two of these wireless routers to connect the two networks. Both routers need to be set to AP Bridge (Point t

34SYSTEM & NETWORK SETUP and increases the wireless coverage area by repeating an existing wireless signal. Concerning the setup, you need

35SYSTEM & NETWORK SETUP you aren’t sure what this should be set to, leave it as the default value of 2346. RTS Threshold — Set the RTS (return t

36SYSTEM & NETWORK SETUP between 802.11b and 802.11g/n wireless access points. NOTE: The recommended setting is either “Auto” or “Always.” Tx

37SYSTEM & NETWORK SETUP When you select a key format, the number of characters in the key will be displayed. For example, if you select “

38SYSTEM & NETWORK SETUP2.7.3.3 Wi-Fi Protected Access (WPA) Pre-Shared Key WPA Unicast Cipher Suite — Once you select one of the three cipe

39SYSTEM & NETWORK SETUP “WPA (TKIP),” “WPA2 (AES)” or “WPA2 Mixed” — make sure your wireless clients support it. RADIUS Server IP address — En

4SAFETY GUIDELINESSAFETY GUIDELINESFor the protection of equipment users and connected devices, follow these safety guidelines:1. This router is desig

40SYSTEM & NETWORK SETUPEnable Access Control — Select to enforce MAC address ltering. The router will not lter the MAC addresses of wireless

41SYSTEM & NETWORK SETUPThis router supports two types of WPS: Push-Button Conguration (PBC) and PIN code. To use PBC, you need to push a specic

42SYSTEM & NETWORK SETUP password cannot be found in the dictionary and consists of a combination of characters, symbols and numbers. You shou

43ADVANCED FUNCTIONS3 ADVANCED FUNCTIONS3.1 Quality of Service (QoS) Quality of service provides an efcient way for computers on the network to sha

44ADVANCED FUNCTIONS performance of your Internet service. If you’re not sure about these numbers, contact your ISP. QoS can only be effective if

45ADVANCED FUNCTIONSLocal IP Address — Specify the local (source) IP address that will be affected by this rule. Enter the starting IP address in th

46ADVANCED FUNCTIONSClick the “NAT” menu on the left of the Web management interface. NAT is enabled by default, and there is normally no need to chan

47ADVANCED FUNCTIONSType — Select the type of connection from the drop-down menu: “TCP,” “UDP” or “Both.” If you’re not sure which to use, select “B

48ADVANCED FUNCTIONSEnable Virtual Server — Check to enable this function; uncheck to disable. Private IP — Enter the IP address of the computer on th

49ADVANCED FUNCTIONS Current Trigger-Port Table — All the settings for the specifal applications are listed here. Delete — To remove a Sp

5HARDWARE1 HARDWARE1.1 Front Panel DisplayLED Status Description POWER

50ADVANCED FUNCTIONS 3.3 Firewall In addition to the NAT feature, this router provides rewall functionality to block malicious intruders fr

51ADVANCED FUNCTIONS ltering table will be able to connect to the network, and all other network devices will be rejected. Client PC MAC addr

52ADVANCED FUNCTIONS3.3.2 Add PCClicking “Add PC” on the Access Control screen will display this page.Client PC Description — Enter up to 16 alphanum

53ADVANCED FUNCTIONSProtocol — If the service you need is not listed, you can create a new service yourself. Select “TCP” or “UDP” from the drop-do

54ADVANCED FUNCTIONSAdd — Click to add the URL/keyword to the URL/Keyword Filtering Table. Reset — Click to remove all entries in the “URL/Keyword” te

55ADVANCED FUNCTIONS3.3.4.1 DoS – Advanced SettingsClicking “Advanced Settings” on the rst DoS Module screen will display this page. Ping of Death —

56ADVANCED FUNCTIONS Computer Name — With all the computers connected to the router listed in this drop-down menu, you can select a name wi

57ADDITIONAL FUNCTIONS4 ADDITIONAL FUNCTIONS/FEATURES4 .1 Status This screen and the submenus that can be accessed from here show information about

58ADDITIONAL FUNCTIONSThis screen shows IP address information the router has obtained. If you experience problems with your Internet connection, open

59ADDITIONAL FUNCTIONSSave — Click to save the current event log to a text le. Clear — Click to delete all event log messages displayed. Refresh — Cl

6SYSTEM & NETWORK SETUP2 SYSTEM & NETWORK SETUP2.1 Connecting the Router 1. Connect your DSL or cable modem to the WAN port of the router us

60ADDITIONAL FUNCTIONSRefresh — Click to display the latest information. NOTE: The information is accumulative and is only reset after the router i

61ADDITIONAL FUNCTIONSRestore Settings — Click “Browse…” to select a saved conguration le from your computer, then click “Upload” to transfer the

62ADDITIONAL FUNCTIONS4.2.3 ResetThis screen lets you restart the router without disconnecting the power from the unit. A restart (or system reset) m

63TROUBLESHOOTING5 TROUBLESHOOTINGThis section helps you troubleshoot problems you may be experiencing with the router. Before you contact your deale

64TROUBLESHOOTINGMy wireless notebook cannot see or connect to the wireless network. • Check if Broadcast ESSID is off. Remember that you need to in

65GLOSSARY6 GLOSSARYDefault Gateway (Router): Every non-router IP device needs to congure a default gateway’s IP address. When the device sends out

66GLOSSARYISP: Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or orga

67SPECIFICATIONS7 SPECIFICATIONSModel 524988 450NStandards• IEEE 802.1d (Spanning Tree Protocol)• IEEE 802.11a (54 Mbps Wireless LAN)• IEEE 802.11

68SPECIFICATIONS - DHCP - DNS• NAT: - Virtual server - Port forwarding - Special applications (port trigger)• Firewall: - Access contro

69SPECIFICATIONS• Channels: - USA & Canada: 11 channels - Europe: 13 channels• Output power: - 11n (300 Mbps): 20 MHz: 17 dBm; 40 MHz: 16

7SYSTEM & NETWORK SETUPNOTE: If this procedure is successful, skip the following subsections and proceed to 2.3 Using Quick Setup. If the above pr

70SPECIFICATIONSModel 525268 300NStandards• IEEE 802.1d (Spanning Tree Protocol)• IEEE 802.11a (54 Mbps Wireless LAN)• IEEE 802.11b (11 Mbps Wirele

71SPECIFICATIONS - Special applications (port trigger)• Firewall: - Access control based on MAC address - URL lter - DMZ (demilitarized zone

72SPECIFICATIONS - WPA TKIP - WPA2 AES - WPA2 mixed - WPA RADIUS - Client access control through media access control (MAC) lter• Antennas

73 COMPLIANCE STATEMENTSFCC Class BThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 1

74

INTELLINET NETWORK SOLUTIONS™ offers a complete line of active and passive networking products. Ask your local computer dealer for more information or

8SYSTEM & NETWORK SETUP2. Select “Obtain an IP address automatically” and “Obtain DNS server address automatically,” then click “OK.”

9SYSTEM & NETWORK SETUP2.2.2 Windows Vista/7 IP Address Setup 1. Click “Start,” then go to the control panel. Click “View Network Status and Task